| S.No |
Accessory |
Description |
Image |
| 1. |
Common Base Frame |
It is made up of M.S. and provides common base to motor and blower. It eliminates relative vibration and misalignment in between motor and blower. |
|
| 2. |
Slide Rail |
Mild steel slide rail is used to adjust the tightness of the belt.
It increases the smoothness in operation and helps in adjustment. |
|
| 3. |
Suction Silencer |
It is fitted at the suction end of the blower.
It reduces inlet air sound to reasonable level as per I S specifications |
|
| 4. |
Discharge Silencer cumInterconnecting Pipe line |
It is fitted at the discharge end as an interconnecting pipeline.
It reduces the outlet air sound as per IS specifications. |
|
| 5. |
Suction Filter |
It is fitted at the suction silencer and filters all the dust particles. (Up to 5 micron).Use of the suction filter results in the increased life of internal parts of the blower by preventing them from dust. |
|
| 6. |
Motor Pulley |
Fitted at motor shaft. V-Groove motor pulley transmits maximum power without slippage loses |
|
| 7. |
Blower Pulley |
Fitted at blower Shaft. By adjusting the size of blower pulley,
it is easy to achieve different RPM with Fixed motor RPM. |
|
| 8. |
V-Belt |
Fitted over motor pulley and blower pulley. V-Belt transmits maximum power without slippage.
It’s heat resistant, oil and dust protection properties results in the increased life. |
|
| 9. |
V-Belt Guard |
It is fitted on pulley side base frame. Protects from accidents and covers the rotating belt. |
|
| 10. |
Pressure Gauge With Isolation Valve and Syphon |
Fitted on the interconnecting pipeline and indicates the pressure in pipeline. Isolation valve makes the gauge durable.Syphon arrangement of the gauge pipe damps the sudden effect/release of the pressure |
|
| 11. |
Safety Valve |
Fitted on interconnecting pipeline.
It release the extra increased pressure automatically. |
|
| 12. |
Non Return Valve |
Fitted at the end of interconnecting pipeline. It prevents the reverse flow/thrust in the anti flow direction. |
|
| 13. |
Anti Vibration Pad |
Fitted in between base frame and foundation. It absorbs all kind of vibration up to reasonable level as per I S specifications |
|
| 14. |
Expansion Joint |
Fitted after NRV. It plays significant role in preventing the pipe misalignment .It also adjusts thermal expansion. |
|
| 15 |
Foundation Bolts |
Fitted to clamp base frame with foundation. Prevents vibration and movement of the base frame. |
|
| 16. |
Gasket |
Used at the suction and discharge end of the blower. It helps in preventing leakage. |
|
| 17. |
Filter Choking Device |
Fitted in between filter and silencer.
It indicates the dust concentration in the filter. |
|
